2022 Good Quality Thermoform Fill Seal Machine - XC100-130/125-WF Full-auto Cooling Tower Fill Making Machine – Mengxing
2022 Good Quality Thermoform Fill Seal Machine - XC100-130/125-WF Full-auto Cooling Tower Fill Making Machine – Mengxing Detail:
Machine Details
Usage
This vacuum forming machine is widely used for making vacuum formed products like cooling tower fills from PVC, PS, PP, EPS, PET, Bio-degradable material, APET, PETG and so on.
II,Operation Principle
Operation processes: The heated and soften plastic sheet are being vacuum formed in the mold in order to get the various finished products. The operation processes are: sheet-feeding—heated—forming—side trimming— crosscut.
Structure Feature
01. The machine is combined with pneumatic , mechanical and electricity driving, adopt PLC control . It can achieve sheet feeding , heating , forming , side trimming , crosscut into continuous job .
All working action can adjust uder non-stop production . It’s convenient and high capacity , easy for operation .
02. The working method can crosscut by different pattern of fill .
03. Servo motor feeding , feeding length stepless adjustabe , precision and reliable.
04. Cutting unit with servo motor driving , electrical & pneumatic adjustable by different length crosscut ( the length must be longer than each forming mold length ) .
05. Forming area is big and easy for mold installation & replace.
06. Cylinder roll sheet loading , feeding chain manual adjust.
07. Upper , lower mold stroke limited , up mold descend motor adjust.
08. Forming area double adjustable , can save the sheet material .
09. Back acting plate adopt double cylinder method , motor setting position .
10.Vacuum in two steps.
11. Fan blowing , air spray cooling device .
12. Heater adopt individual heating temperature control . ( Point to Point )
13. Advance sheet feeding , heating parameter can automatic adjust.
Technical Parameter
|
Parameter |
XC100-130/125-BWF (mode No.) |
|
| Suitable sheet width(mm) |
1000-1300 |
|
| Sheet thickness(mm) |
0.3-1 |
|
| Max.dia. of sheet roll (mm) |
600 |
|
| Up mold stroke(mm) |
300 |
|
| Down mold stroke(mm) |
250 |
|
| Max. forming area(mm2) |
1200×1200 |
|
| Max. forming height(mm) |
120 |
|
| Max. forming depth(mm) |
100 |
|
| Capacity (cycle/min) |
4-8 |
|
|
Product Shaping& Cooling |
Air vent qty. |
7PCS |
| Air sprayer qty. |
16PCS |
|
| Gas source (outlay) | Air supply (m3/min) |
≥3 |
| Pressure(MPa) |
0.8 |
|
| Water consumption |
4-5 Cube/Hour |
|
| Vacuum pump ( Outlay ) |
Busch R5 0100 |
|
| Power supply |
3-phase 4-wire 415V/ 220V 50Hz |
|
| Heating power(Kw) |
59.4 |
|
| Feeding motor power(Kw) |
3.0 |
|
| Power of whole machine(Kw) |
68.6 |
|
| Dimension(L×W×H)(mm) |
9600×3400×2500 |
|
| Weight(Kgs) |
7500 |
|
Technical ParameterV,Technical Configuration
| PLC |
Taiwan Delta |
| Touch screen monitor ( 10.4″inch /Color ) |
Taiwan Delta |
| Feeding motor（3.0kw） |
Taiwan Delta |
| Heater with probe(1pcs) |
Germany |
| Heater(99pcs) |
China |
| Solid voltage regulator |
China |
| Contactor |
Germany Siemens |
| Thermo relay |
Germany Siemens |
| Relay |
Japan Omron |
| Vacuum pump(2 set) |
Busch R5 0100 |
| Pneumatic component |
Japan SMC |
| Cylinder |
China |
| Air sprayer(8pcs) |
Meiji |
| Fan blower(4×0.55 Kw ) |
Manda |
Sample Pictures
Container Pictures
Product detail pictures:
Related Product Guide:
The key to our success is Good Products Good quality, Reasonable Value and Efficient Service for 2022 Good Quality Thermoform Fill Seal Machine - XC100-130/125-WF Full-auto Cooling Tower Fill Making Machine – Mengxing , The product will supply to all over the world, such as: Dominica, Naples, Malawi, All the employees in factory, store, and office are struggling for one common goal to provide better quality and service. Real business is to get win-win situation. We would like to provide more support for customers. Welcome all nice buyers to communicate details of our products with us!
By Megan from Poland - 2018.11.06 10:04
The product manager is a very hot and professional person, we have a pleasant conversation, and finally we reached a consensus agreement.
By Jerry from Johannesburg - 2018.12.10 19:03
